What is J-Lube powder used for?

J-Lube is a concentrated, non-irrrating powder that dissolves easily in water to form an obstetrical lubricant.

Is J-Lube powder safe for human use?

Assuming you believe the manufacturer, it is safe. The sucrose in the powder isn’t of any concern, and the polyethylene oxide that makes up the rest of it is sometimes used as a thickener and texturizing agent in shampoos, conditioners, lotions, etc. and is considered to have a low toxicity and be non-irritating.

How do you make J-Lube powder?

Mix one part J-Lube powder into a large cup with 5 parts water. (i.e. 2 Tablespoons J-Lube with 10 Tablespoons of water). Adjust to preference. 2, Stir or Blend thoroughly until no white chunks of lube powder are visible.

How long does mixed JB last?

J-Lube should be refrigerated right away if it’s not being used. It’s supposed to only keep for a couple of weeks, but I’ve had no problem with keeping a premixed batch in our (very cold) refrigerator for up to six weeks.

Is J Lube toxic?

J-Lube is toxic to the peritoneal cavity, so if it gets in the abdomen, it will kill the cow.

Is J Lube safe for dogs?

It’s the same stuff BD uses to make their lube white. Also, I personally haven’t had any issues with infections or irritation, since this brand is very gentle and safe for animals (it was actually invented for veterinary purposes) but some folks have complained of yeast infections or rashes.

Is Jlube toxic?

Is mixing Lube safe?

In its mildest form, mixing different lubricants may lead to a degradation of lubricant performance. Mixing the same API grades of synthetic passenger car motor oil and mineral oil-based engine oil won’t damage the engine, but you will lose the performance features you expect from the synthetic.

Does J Lube go bad?

While not every lubricant is stamped with a sell-by date, their shelf life generally ranges from one to three years, according to testing data from the Food and Drug Administration. “I typically tell my patients to use fragrance-free, water-based lubricants as these are less likely to cause an allergic reaction,” Dr.

Can you mix lubes?

Why is glycerin bad in lube?

Glycerin is a humectant (meaning it helps to retain moisture) that shows up in a lot of lubes, especially ones that are flavored or warming. In particular, glycerin may contribute to an overgrowth of yeast, which can then cause yeast infections.

Is J-Lube toxic?

What kind of material is J Lube made out of?

J-Lube is a concentrated lubricant that comes in powder form. According to the bottle, it is manufactured for Jorgensen Laboratories in Loveland, Colorado and consists of 25% polyethylene polymer (polyethylene oxide) and 75% dispersing agent (sucrose, according to the MSDS which you can find here in ASCII text formatand here in PDF format).

How much PEO is in J Lube water?

It is the active ingredient in J-Lube and PolyOx WSR-301. These popular PEO sources are potent in extremely small quantities. 0.125 grams of fresh PolyOx WSR301 powder is more than enough to make one gallon of bubble juice (that is 0.008 grams per liter water). It can be used as the sole additive or in combination with other polymers.

What happens when you put J Lube in water?

Stir in enough J-Lube to make the water a bit cloudy. It will take a pretty hefty amount to do this, and the water will have a lot of clumps floating around. Now, take that mixture and microwave the bejeezus out of it.

Is it safe to use J Lube in shampoo?

Is J-Lube safe? Assuming you believe the manufacturer, it is safe. The sucrose in the powder isn’t of any concern, and the polyethylene oxide that makes up the rest of it is sometimes used as a thickener and texturizing agent in shampoos, conditioners, lotions, etc. and is considered to have a low toxicity and be non-irritating.