What does 0e mean on a LG washer?
What does 0e mean on a LG washer?
OE error code indicates that the washer is unable to drain the water it used during the wash cycle. OE can be triggered by a kinked drain hose or a clogged drain pump filter.
How do I fix the error code on my LG washer?
How to reset the washing machine:
- Press POWER to turn the washer off.
- Unplug the washer from the power outlet or turn the circuit breaker to the unit off.
- With the power disabled, press and hold the START/PAUSE button for 5 seconds.
- Plug the washer back in, or turn the circuit breaker back on.
What are the codes on a Samsung washer?
Samsung Washing Machine Error Codes
| Error Code | Cause |
|---|---|
| CE, E8 | Cooling Error (temperature of water has not dropped below 55°C in 30 minutes after the washer cooling operation) |
| dE, Ed | Door Open Error (door not closed correctly/properly) |
| dE1 | Door Lock Switch Error |
| dE2 | On/Off Switch Error |
How do I reset the OE code on my LG washer?
Slide the clean drain pump filter back into the washer. Be sure the filter is put back secure. Put the cover back on the drain pump filter by turning it clockwise. Once the filter is cleaned, re-secured, and free from any blockages, wash a small load to be sure the error code OE has cleared.
How do I force drain my LG washer?
If you want to perform a drain-only cycle, turn on your LG washer and press the spin button and then press start. After a few minutes, the cycle will end and your washer should have drained out the water.
What is dE error in LG washing machine?
A dE error code indicates that the washer door was unable to lock. This can normally be resolved by performing a simple reset on the washing machine.
Can you reset a LG washing machine?
To complete a power reset on your LG washer, unplug the machine from its power source. Wait at least five minutes before plugging the unit’s electrical cord back into the outlet. Unless there are other problems with the machine, the washing machine should reset.
How do I reset the code on my Samsung washing machine?
Reset your washing machine Resetting your washing machine is easy. Unplug it (or turn off power at the circuit breaker), wait some time for the electrical charge to clear out of the washer (usually 1 to 5 minutes at most), and then power it up again. That’s it. That’s all it takes to reset.
How do I fix the code on my Samsung washing machine?
Putting too many items in the washer and overloading it can cause the issue. Removing a few items should resolve the error code. As mentioned above, large, heavy items are also often responsible for the UR code. Untangling or redistributing the load or adding similar items to balance out the load should fix the issue.
How do I fix OE error on my LG top load washer?
Force drain the unit by starting a cycle and pausing it….If you don’t have SPIN ONLY
- Power the unit ON.
- Select a cycle.
- Press START/PAUSE button to START the cycle.
- Allow a few minutes to pass so the cycle begins.
- Press the START/PAUSE button to PAUSE the cycle.
- Run an empty wash cycle to see if issue occurs again.
Why is LG washer not draining?
Unbalanced Load. One of the most common reasons your LG washer won’t drain often results from an unbalanced load. Washing a large or heavy item can cause it to settle on one side of the washer drum. When this happens your LG washer won’t drain or spin properly and water will be left behind.
How do I manually drain my LG top load washer?
Force drain the unit by starting a cycle and pausing it. After 8 minutes the unit will automatically time out, display DR, and try to drain the unit. Press START/PAUSE button to START the cycle. Allow a few minutes to pass so the cycle begins.