Lifehacks

How much does it cost to drill a well in PA?

How much does it cost to drill a well in PA?

A: On average, a well costs around $5,000.00-$7,000.00. This includes all costs pertaining to drilling and the installation of the pumping system. Conditioning equipment typically ranges from $1,500.00-$3,000.00.

How much does it cost to drill a well per foot?

Most well drillers also have a minimum charge, usually around 100ft minimum which at $45 per foot would be $4500. Drilling a water well is a long term investment and most people are reluctant to drill without knowing if they will find water, and if so at what depth.

How much does a well cost to dig?

Well Drilling Cost Drilling a well costs $5,500 for an average depth of 150 feet. Most projects range between $1,500 and $12,000. Expect to pay between $15 and $30 per foot of depth, or up to $50 for difficult terrain. Digging might be enough for shallow depths, ranging between $10 and $25 per foot.

Is it legal to drill your own well in PA?

Farmers and other persons drilling at their own residence are not required to obtain a license. (b) Employes of licensed water well drillers, drilling wells within the scope of their employment, do not need individual licenses. It is the contractor who shall be licensed.

How much does it cost to drill a 200 foot well?

Well Drilling Cost

Depth In Feet 4” Diameter PVC Casing 6” Diameter Steel Casing
100 $3,550 $6,120
150 $5,325 $9,180
200 $7,100 $12,240
250 $8,875 $15,300

How much does it cost to drill a 60 foot well?

The average cost to drill a well ranges from $15 to $60 per foot, although $15 to $30 per foot is a good guideline for most projects. You should expect to pay more when digging in remote areas or into difficult terrain (rocky, sloped, or dry, low-quality soil)—approximately $50 to $60 per foot.

Do you pay for well water in PA?

More than a million homeowners in Pennsylvania depend on private water wells for their drinking water needs. In the commonwealth, protection and maintenance of a private well is the responsibility of the homeowner.

Do you need a permit to drill a water well in Pennsylvania?

Pennsylvania law requires water well drillers to obtain a license from the DCNR Bureau of Geological Survey. The Pennsylvania Licensed Water Well Drillers database lists drillers that have a license. A license does not imply that a driller has knowledge of proper drilling or well construction practice.

How much does it cost to put in a well and septic system?

The cost to put in a well and septic system ranges from $6,000 to $20,000 depending on the type of septic system, type of absorption field, size of the septic tank, and depth of well drilling required.

How deep is the average well?

In general, private home wells tend to range from 100 to 500 feet in depth. However, they can be much deeper than this in some cases. There are even some wells that go past the 1,000 foot mark. The average well depth in your area will depend on several factors.