How does a door jamb light switch work?

Typically, a jamb switch turns a light on when the door is opened and shuts the light off then the door is closed. It contains a small mechanical component that moves when the door does, opening and closing a circuit. Jamb switches are typically very small, as they need to fit in a compact space.

What is an architrave switch?

Architrave Light Switches are generally used in areas where space is restricted. Often used in between 2 door frames or close to corners or obstructions where a standard switch simply couldn’t fit. Light Switches are generally available to switch 1 way and/or 2 way circuits.

Where is the door jamb switch located?

Summary: The door jamb switch is the device that activates the interior dome light when your car door is open. There are a few locations for the car door jamb switch. It can be in the front of the door frame, on the rear door jamb, or attached to the door latch mechanism behind the interior door handle.

What is a reed switch on a door?

Reed switches are used in many devices and electrical systems including security systems, doorbells, and even laptops. In a security system, one part of the reed switch attaches to the door or window while the other attaches to the frame such that they sit parallel to each other when the door or window is closed.

How close can a light switch be to a doorway?

8 inches
There are no national laws on how far a light switch should be from a door frame. It’s recommended that a switch should be installed at least 8 inches from the frame to leave space for the switch plate.

What is ogee architrave?

Ogee architrave is popular style of moulding that features an s-shape along the top side. This style offers a more traditional look and you can choose between a variety of widths to decide how prominent or minimal you would like the architrave to be.

Can a door jamb switch be put on a closet door?

The door jamb switch can be a very useful device that can be installed on the hinge side of a closet door. With this type of switch, it will not be necessary to switch the closet light on or off manually. Door jamb switches offer convenience because most closet lights are hard to reach or hard to find in the dark.

How do you connect a light fixture to a door jamb?

Cap the wires by putting a wire nut on the connected wires. Connect the black wire from the door jamb switch to the hot terminal or black wire pigtail on the light. Carefully fold the wire back into the light fixture junction box and remount the light fixture to the junction box.

What’s the best way to install a door jamb?

Drill out the corner holes using the drill bit. Then, use the chisel to remove the rest of the wood until you have the depth you need to install the switch junction box. Calculate the depth of the hole so that the switch cover plate will be flush against the door jamb when you are done installing the switch.

How do you install a light switch in a closet?

Secure the plate cover to the junction box of the switch and screw all connections in place. Make certain that the screws will not interfere with the closing of the closet door. Turn on the power and check if the switch works. If the light turns on when the door is opened and turns off when the door is closed, the installation is successful.