How do I adjust my ZVOX soundbar?

How do I adjust my ZVOX soundbar?

Using the ZVOX speaker remote control, press the POWER button to turn on the ZVOX speaker. You should be able to hear the TV sound from the ZVOX speaker. Use the volume buttons on the ZVOX speaker’s remote control to adjust the sound to a good level. You are done!

How do I control my ZVOX with my Roku remote?

ZVOX Audio

  1. Set up your TV to be controlled by the Roku remote by going to Settings -> Remote -> Set up remote for TV control and follow the instructions to program the remote.
  2. Then you can have the ZVOX use our remote learning method to learn the controls from the Roku Stick +’s remote.

How do you reset a ZVOX AV157?

AV155 & AV157 Master Reset Print Press and hold down the OTHER SETTINGS (PS) button on the ZVOX remote for five seconds until you see “PS 0” start to flash on the display. Once you see “PS 0” start flashing on the display, use the volume UP and DOWN arrow buttons on the remote to select PS-15.

How do I control my zvox with my Roku remote?

How do I reset my zvox remote?

Press and hold down the front panel INPUT button for about 15 to 20 seconds. When you see the three letters “ r S t ” appear on the display (see figure below), release the INPUT button. The SoundBase will then show the four-digit firmware code number and turn “ON”. The RESET is complete.

How do you reset a zvox AV157?

What do you hear with noise Cancelling headphones?

Noise-cancelling headphones are headphones that reduce unwanted ambient sounds using active noise control. Noise cancellation makes it possible to listen to audio content without raising the volume excessively. It can also help a passenger sleep in a noisy vehicle such as an airliner.

Where can I find the zvox user manual?

The ZVOX AV157 user manual on the attachment. AV157 International User Manual (French, German, Spanish, Dutch, Portuguese, Italian) On the attachment is the user manual available in 6 different languages. On the attachment the AV257 user manual will be found.

Can a zvox system work with a Samsung TV?

ZVOX systems will work with any brand of television provided the TV model in question has either a digital audio output or an analog audio output. There were several older Samsung TV models that did not have any type of audio outputs on them at all.

Can you pair another remote to a zvox speaker?

This is because the subwoofer output jack on the ZVOX is a full range monaural audio output. CAN YOU PAIR ANOTHER REMOTE TO THE SYSTEM? Yes. The ZVOX system can learn the infrared remote commands of one remote control. If you go to our ‘Support’ section of our website, you will see a video titled: “Teaching remotes to control the ZVOX speaker”.

What does auto standby do on zvox speakers?

All ZVOX speakers come with an ‘Auto Standby’ feature activated, which will automatically power the soundbar off after 20 minutes of not receiving an audio signal. Some televisions may cause the soundbar to turn off in the middle of a program due to a weak audio signal.