Questions and answers

How do I access HP Virtual Connect Manager?

How do I access HP Virtual Connect Manager?

Remote access to the Virtual Connect Manager

  1. Using any SSH client application, start an SSH session to the VCM.
  2. When prompted, enter the assigned IP address or DNS name of the VCM.
  3. Enter a valid user name.
  4. Enter a valid password.
  5. Enter commands for the VCM.

What is Virtual Connect on HP blade?

Virtual Connect is a new Virtualization technology from Hewlett-Packard (HP) that de-couples fixed blade server adapter network addresses from the associated external networks so that changes in the blade server infrastructure and the LAN and SAN environments don’t require a complex choreography among server, LAN, and …

What is HP Virtual Connect FlexFabric?

HP Virtual Connect FlexFabric-20/40 F8 Modules are the simplest, most flexible way to connect virtualized server blades to data or storage networks.

What is HP interconnect?

The HP interconnect modules have downlink and uplink ports. The uplink ports are pretty obvious, as they have a port on them that can be connected to a switch or another device. For example, in a c7000 chassis there are 16 server bays so an HP Flex-10 interconnect would have 16 downlink ports, one for each blade.

How do I reset my HP Virtual Connect Manager password?

Reset Administrator password from HP Virtual Connect and Onbord Administrator

  1. Remove the Virtual Connect Ethernet module from interconnect bay 1.
  2. Remove the access panel from the Virtual Connect Ethernet module.
  3. Set switch 1 to the ON position.
  4. Install the access panel.

Is virtual connect a switch?

HP Virtual Connect modules are compatible with existing data and storage networks, protocols, and procedures, as well as with all other standards-based switch products. VC modules provide high-performance and end-to-end optical or copper connections with HP Networking or other brands of aggregation or core switches.

What is a Virtual Connect domain?

A Virtual Connect Domain can be further defined as a single enclosure domain, which consists of 1 BladeSystem enclosure and up to 16 servers, or as a multi enclosure domain which can contain up to 4 physically linked enclosures and 64 servers managed as a single logical group.

How do I reset my HP Virtual to factory settings?

You can fully reset the Virtual Connect modules by moving the modules in interconnect bays 1 and 2 to other slots in the same chassis. After the modules have been reset, move them back to slots 1 and 2. You can also do the ‘Clear VC Mode’ in the OA ‘Reset Factory Defaults’ screen. This may clear the second issue.

How do I change virtual connect password?

Which is HP Virtual Connect module for BladeSystem?

An innovative, new class of integrated interconnects, the HP Virtual Connect Flex-10/10D Module for c-Class BladeSystem simplifies your data center and makes it change-ready.

What kind of enclosure does HP Virtual Connect Support?

The VC modules support the HP BladeSystem c7000 Enclosure, the HP BladeSystem c3000 Enclosure, and all the server blades and networks contained within the enclosure. FlexFabric modules are only supported in BladeSystem c7000 enclosures and G6 or newer server blades with Virtual Connect firmware v3.15 and later.

Where can I find VCM on my HP blade?

VCM is embedded on the VC-Enet module. You can access VCM through a web-based GUI or CLI. The Onboard Administrator provides a web link to the Virtual Connect GUI. The VC modules support the HP BladeSystem c7000 Enclosure, the HP BladeSystem c3000 Enclosure, and all the server blades and networks contained within the enclosure.

What does the HP Virtual Connect manager do?

Virtual Connect Manager The HP Virtual Connect Manager (VC Manager) manages enclosure connectivity and is seamlessly integrated into both the HP Insight Control Data Center Edition and the HP Control Tower. VC Manager defines available LANs and SANs, sets up enclosure connections to the LAN or SAN, and defines and manages server I/O profiles.