Can you snake a toilet with a coat hanger?

Can you snake a toilet with a coat hanger?

The first method you should try is the Wire Coat Hanger approach. Next, completely wrap a rag around the hook end of the wire to prevent any scratching or minor damages to your commode. Finally, you will insert the hanger in toilet and gently rattle the hanger until you feel the obstruction has been moved.

Can you use a hanger as a drain snake?

We understand that most homeowners don’t own drain snakes and other specialized plumbing equipment, but almost everyone has a wire coat hanger somewhere in the back of a closet. Using a wire coat hanger, you can clear most clogs without having to disassemble the drain or using harsh chemicals.

Can you use a plastic hanger to unclog a toilet?

Use a metal coat hanger that’s coated with plastic if you have one — that way the hanger won’t scratch your toilet. If you don’t have one, wrap some tape over the wire hanger instead. Push the wire up into the toilet canal and try to clear the way.

When should I snake my toilet?

So if you’ve tried a plunger, a hot-water flush, or even a homemade baking soda solution and things still aren’t flowing like they should, it’s probably time summon the snake (also known as a plumber’s auger).

What can I use instead of drain snake?

You can also make your own drain snake at home with a pipe cleaner or a wire hanger. Cut a 2-liter bottle into a spiral with “teeth” in it, which is a very effective and cheap alternative to store bought drain snakes. Wet and dry vacuums are powerful appliances with a lot of suction.

How do you use a plumbers snake in the toilet?

Place the end of the auger into the toilet bowl so that it points down the drain. Turn the handle clockwise to extend the auger’s cable (or “snake”) down into the drain towards your clog.

What can I use instead of a drain snake?

Why is my toilet not unclogging?

Get a good seal on the toilet drain (that is, make sure you’re covering the entire drain or you won’t have enough pressure to loosen the clog.) Cover the plunger in water. You need water, not air, pressure to loosen the clog. If your toilet lacks water, pour in enough water till the plunger is covered.

How to snake a toilet with a hanger?

How to snake a toilet with a hanger. 1 1. Prepare your tools. Raid your supply closet for some gloves, cleaning products, drain cleaner, and some old rags. Then, go to your closet and take 2 2. Try to lubricate the clog. 3 3. Try to dislodge the clog with the hanger. 4 4. Do another unclogging measure. 5 5. Clean-up.

How do you unwind a wire hanger on a toilet?

Then, unwind the wire coat hanger completely except for the hook. After the wire coat hanger is unraveled, wrap an old rag around the end of the metal. This will prevent the wire from scratching the porcelain of the toilet. 2. Try to lubricate the clog Since we won’t be using any fancy toilet unclogger tools, it is best to lubricate the clog first.

What does a wire coat hanger do for a toilet?

The use of a wire coat is very similar to the use of a toilet snake because it entails a wire getting into the drain either to push or extract a clog in the pipes. This means it can be effective for clogs that are much deeper or further along the drain, than just being the trap way.

What should I do if my toilet hanger is scratching my toilet?

Wrap a rag around the hooked part of the hanger to keep it from scratching your porcelain toilet bowl.The only way to fix that is to buy and install a new toilet Keep pushing it into the pipe until you feel it stop. That’s probably your clog