How do you measure a cooker splashback?

How to measure for a splashback

1. Use a spirit level to check the walls and surfaces are straight and level.
2. Measure the width and height with a tape measure and take off 2mm to allow for the tolerance of the glass.
3. If you need socket holes measure the position of these from the bottom and one edge.

What is a standard size splashback?

600mm x 700mm x 6mm
Standard splashbacks – 600mm x 700mm x 6mm, opti-white toughened glass.

Can you use perspex as a cooker splashback?

When acrylic is safe First of all, acrylic splashbacks are safe for use behind an induction hob. The rings on an induction cooker don’t emit the high temperatures of their electric or gas counterparts; they are highly efficient, and the surrounding area will have very little excess heat.

What do you put on a wall behind a cooker?

A stainless steel backsplash creates a sleek, modern look. Flat panels can be attached to the wall behind your stove to provide a functional surface that protects your wall from cooking spatters. Textured and patterned stainless steel backsplashes are also available to give a decorative accent to your kitchen.

What size should a cooker splashback be?

Our glass splashbacks are available in 600mm(w) x 750mm(h) & 900mm(w) x 750mm(h) which fit perfectly behind most cookers, hobs, ranges, and sinks. Cut to Fit splashbacks are available in 3000mm x 600mm panels.

How wide should a cooker splashback be?

When glass is cut there is usually a 2mm tolerance on each edge therefore if your splashback is 100cm wide you should make it slightly smaller so 996-998mm if it has to fit between cupboards or upstands. 2mm in total on the total width or height is usually enough tolerance to make sure it fits.

What is standard height of splashback?

600mm
The height of the splashback is normally 600mm and you can tile this block in its entirety. Simple.

How high do kitchen splashbacks go?

Taking the overall size of your splashback space into account will make it easier to narrow down your options; Standard kitchen splashback heights are usually at 600mm however, this figure can be adjusted to suit as necessary, especially in the installation of custom designed kitchens, often ranging between the …

Can splashbacks be cut to size?

Because they can be cut to any size or shape, splashbacks are versatile for numerous areas of the home. They’re an effective way of protecting the surface beneath, such as bathroom or kitchen walls where water and splashes can damage the wall over time, refreshing the look of the area.

Will acrylic splashbacks melt?

Unlike Glass Splashbacks, Acrylic Splashbacks can start to melt and deform at 80C and are liquid at 160C so they are not very heat resistant. Acrylic Splashbacks can be used behind an induction hob, hot pots and pans should not come into contact with an acrylic splashback.

What can I use instead of a backsplash?

Six Alternatives To The Tile Backsplash That Are Practical

• Venetian Plaster. I’ve already spilled how much I love this material after I applied to our living room wall.
• Glass.
• Thermoplastic backsplash.
• Stone Slabs or Panels.
• Metal (copper or stainless steel)
• Vinyl wallpaper.
• Chalkboard paint.
• Reclaimed Wood.

Can splashbacks be put over tiles?

Splashbacks can be installed over existing tiles, providing they’re securely attached to the wall and there are no cracks or broken tiles which might impact the adhesion of the panel. Make sure the tiles are level with no high spots and remove any uneven tiles which might distort the final surface of the splashback.