What is valet mode Compustar?

Valet mode is a setting in Compustar systems that will shut down the alarm system and the remote starter. It will only allow the remotes to retain key-less entry to be used to lock and unlock the doors.

What is passive mode Compustar?

Passive arming is a mode that is available in all Compustar and Arctic Start systems. When in this mode the vehicle will automatically lock and arm itself 30 seconds upon leaving the vehicle, disarming the alarm, or unlocking the doors.

What happens in valet mode?

Valet mode disables all system features other than lock or unlock; such as, remote start, alarm triggers, and trunk release. Valet mode can be temporarily activated to prevent unintended use of the system’s many features.

How do I know if my vehicle is in valet mode?

1. Hold down the brake.
2. Cycle the vehicle key in the ignition between the ‘On’ and ‘Off’ positions 5 times.
3. Do not touch anything on the remote.
4. You will know that you have entered valet mode if you see the parking lights flash one time and/or you hear a faint click from within the dash.

What does valet mode do Ford?

It’s called Valet Mode, and it uses a temporary passcode that permits a valet attendant to unlock, start and drive your vehicle using a SecuriCode™ invisible keypad and the SYNC® 3 touchscreen.

Does valet disable alarm?

The valet switch allows you to temporarily bypass all alarm functions, eliminating the need to hand your transmitter to parking attendants or garage mechanics. When the system is in valet mode, all alarm functions are bypassed, however the remote panic feature and remote door locks will remain operational.

What is passive locking?

Passive Door Locking enables you to not even use use the lock button on the key fob or the button on the vehicle’s door handle to lock the vehicle. You simple park, turn the car off, get out, and walk away. If passive locking is enabled, the doors may lock with the key fob inside the vehicle.

Does valet mode disable pin to drive?

Valet mode is perfect for these situations. It hides your addresses, locks the glove box, limits the speed and you don’t have to turn off and then reset you Pin to Drive.

When to use valet mode on a car?

You should also use the valet button if your system is programmed for passive arming and you intend to vacuum or wash the vehicle. To use the valet mode; 1. Disarm the system, enter the vehicle, and turn the ignition key to the ‘Ion” position. 2. Press and hold the button for 3 seconds until the L.E.D. turns on solid.

What does valet mode do on a Compustar?

What is “Valet Mode”? Valet mode is a setting in Compustar and Arctic Start systems that will shut down the alarm system and the remote starter. It will only allow the remotes to retain key-less entry to be used to lock and unlock the doors.

What does valet mode do on FirsTech remote starter?

Valet mode is a setting in Firstech systems that will shut down the alarm system and the remote starter. It will only allow the remotes to retain key-less entry to be used to lock and unlock the doors. Use this field to document the answer to the question discussed in the Knowledge Article. What is “Valet Mode”?

How do I enter passive arming mode on my car?

Have the vehicle turned off and the doors closed. Press the unlock and the trunk buttons (II & III) at the same time. (press and release do not press and hold) You should receive one parking light flash to show you are entering the passive arming mode.