What is a W11 2 sign?

A Pedestrian (W11-2) non-vehicular warning sign may be used to alert road users in advance of locations where unexpected entries into the roadway or where shared use of the roadway by pedestrians might occur. This sign is a diamond shape with a black legend and border on a yellow background.

What does W11 8 mean?

Description. The Fire Station (W11-8) vehicular traffic warning sign may be used to alert road users to locations where unexpected entries into the roadway by emergency vehicles might occur.

What is the correct size for the diamond advance warning sign?

High speed roadway (35 mph and above): Advance warning signs shall be at least 48 inches by 48 inches. In general, uppercase lettering should be at least 7 inches high. Moderately low traffic volumes and speeds (25 to 35 mph): The MUTCD allows 36 inches by 36 inches, with an uppercase lettering size of 5 inches.

What is a W1 8 sign?

Description. The Chevron Alignment (W1-8) sign is used to provide additional emphasis and guidance for changes in horizontal alignment, and may be used instead of or in addition to standard delineators.

Is a no passing zone a warning sign?

No passing zone signs indicate that you are entering a no passing zone so make sure not to try and pass other vehicles. These signs are meant to warn drivers that there are unseen hazards ahead, such as driveways and intersections that could result in a collision.

What is a W1 7 sign?

A Two Direction Large Arrow (W1-7) sign is used as a supplement to a T-Intersection warning sign, and is installed on the far side of the intersection at a right angle to traffic approaching the from the stem end of the “T”. This sign face is not used where there is no alignment change in the direction of travel.

What are speed limit signs?

The speed limit sign is a regulatory sign. Speed limit signs are designed to communicate a set legal maximum or minimum speed that vehicles must travel. Drivers must not exceed the limit that the sign designates. Speed limit signs are road signs that are rectangular and oriented vertically.

What does W2 2 sign mean?

A Side Road (W2-2) symbol sign may be used in advance of an intersection to indicate the presence of an intersection and the possibility of turning or entering traffic. This sign is a diamond shape with a black legend and border on a yellow background.

What does a sideways T road sign mean?

The side road sign is a warning sign. Side road signs indicate there is a side road that enters the highway, typically from the right. Side road signs are a diamond with a sideways “T” symbol in the middle. Location: Ahead of an intersection. They are located ahead of an area where a side road meets a highway.

What does a Chevron sign mean?

A striking way to keep your drivers safe, chevron signs show the edge of the road, dangerous curves, or other hazards. Chevrons are most often used on the outside of a curve or the narrowing of a road. Use a few reflective signs in parking lots, warehouses and high-traffic forklift areas.

What does a broken white line mean?

Solid white lines define lanes of traffic going in the same direction, or they show you the location of the shoulder of the road. Broken or “dotted” white lines are used to show the center line between lanes. • Yellow lines show you where traffic is going in different directions.