How do I know when my vision spinner 2 is fully charged?

When the battery is fully charged the LED light will turn Green. The Battery LED button will light up orange, then blue and then white whilst charging and go out when fully charged.

What thread is the vision spinner?

Vision Spinner vape battery has a 510 thread connection that allows using almost any atomizer or vape attachment [ not compatible with Sub-Ohm Tanks ] Available in multiple color options: black, stainless steel, blue, red, green, purple, pink, white, gold and rainbow.

How do you use a spinner vape?

Begin Vaping Hold up the mouthpiece of your atomizer to your mouth and hold down on the power button on the Vision Spinner 2. From this point on, you should be able to pull from your Spinner and everything should come naturally.

What does it mean when my vape pen blinks 10 times?

Dying battery: Most often, the vape pen will blink ten times when the battery is too low for proper vaping. To fix the issue, recharge the battery. Low voltage: If the battery is charged but the pen is still blinking, it could be due to a low voltage.

Are Vision Spinners good?

When used with a liquidator tank, the Spinner provides some excellent airflow. It keeps the stream of vapor steady and ensures you always have nice thick vapor to inhale. If you have had problems with getting a decent vapor from your tank, then you might want to consider switching to the Spinner.

Can I charge my vape with a phone charger?

Most USB outputs are fine to charge your vape, specifically USB outputs from computers, TVs, game consoles or car chargers. If you have a phone charger that you can use to plug your own USB cable into, that’s the safest option. It’s always best to use the same cable that came with your device to charge your vape.

What is vision spinner2?

The Vision Spinner 2 is a 1600mAh vape pen that you can connect to your favorite 510 or eGo threaded tank or pre-filled vape cartridge. Works with any coil resistance over 1.2 ohms! The Vision Spinner 2 is a perfect battery for an e-cigarette beginner.

How do you use the vision spinner 3?

Vision Spinner 3 S User Manual: The battery is turned on/off by pressing the button five times in two seconds. When the battery is off, the button flashes three times in mixed color to indicate that the battery is activated after pressing the button five times in two seconds.