How do I fix Ultra DMA CRC error?

Hard Drive Ultra DMA CRC Error Count

1. Try different cable.
2. Look if cable connector is connected good with connector on mainbord/harddisk.
3. Try a different controller connection.

What does UltraDMA CRC errors mean?

Description. UltraDMA CRC Error Count S.M.A.R.T. parameter indicates the total quantity of CRC errors during UltraDMA mode. The raw value of this attribute indicates the number of errors found during data transfer in UltraDMA mode by ICRC (Interface CRC).

How do I fix high CRC?

If the number of CRC errors seems excessive, check the following:

1. Check the Line of Sight (LOS) between the transmitter and the receiver.
2. Change the frequency to one which may have less interference.
3. Ensure the antennae and cables are appropriate for the distance of the radio link.

What is raw read error rate?

RAW Read Error Rate is a SMART disk error that appears only in the traditional hard drives. It’s a critical SMART parameter that indicates problem with the disk surface (platter that stores the data), the actuator arm, and the read/write head. A higher RAW Read Error Rate indicates higher chances of disk failure.

What is soft ECC correction rate?

Soft ECC Correction represents count of errors corrected by the internal error correction software, maybe it is reset when reinstalling win10.

How do I reduce CRC errors?

Procedure

1. Enable Interleaver – Interleaver is another layer of error correction that can be configured to help reduce CRCs.
2. Lower the configured maximum DSL speed – lowering the speed will allow the DSL line to have more margin and makes the line more resilient to the effects of induced noise.

How do I fix raw read error rate?

Run Hard Disk Defragmentation Open This PC and right-click on the disk having an error “0x1 Raw Read Error Rate”. Select Properties / Tools / Optimize in the tab Optimize and defragment drive. Select the disk you need to optimize and click Optimize.

How to fix interface CRC error count inside HD tune?

Press Windows key + R to open up a Run dialog box. Next, inside the text box, type ‘regedit’, then press Ctrl + Shift + Enter to open up the Registry Editor with admin access. When you’re prompted by the UAC (User Account Control), click Yes to grant administrative access.

What causes Ultra DMA CRC error count to go up?

Method 3: Replace the power and SATA cable. As several affected users have confirmed, this particular issue can also be associated with a faulty SATA cable or a faulty SATA port. Because of this, the Ultra DMA CRC Error Count error can also be a symptom of a non-congruent cable.

Why do I get a warning in HD tune?

Some Windows users are reporting that they always end up seeing a warning ( Ultra DMA CRC Error Count) when analyzing their HDD using the HD Tune utility. While some affected users are seeing this with used hard drivers, others are reporting this issue with brand new HDDs. What is Ultra DMA CRC Error Count?

Is there way to reset HD tune error count?

There is no way to reset that value, since it is just a count of how many times it has happened. Just keep an eye on it and make sure it doesn’t increase at all. If it doesn’t increase, then you don’t have to worry about it. 2cm mark on bench with a razor blade.