How much clearance is needed for a gas fireplace?

The National Fire Code requires all combustible material to be at least 6 inches from the opening of the firebox. For every 1/8 inch of protruding combustible material, you must account for an additional inch of clearance.

What is a 0 clearance fireplace?

Zero-clearance fireplaces are pre-manufactured fireplaces that can be installed almost directly against combustible materials like wood, walls, or panelling. The construction and materials of the firebox do not allow the outside temperatures of the firebox to affect those materials and do not require a hearth.

What are the dimensions of a gas fireplace?

Standard Gas Fireplace Dimensions Gas fireplaces can be anywhere from 20 inches to 60 inches, but the size of the gas fireplace you choose will ultimately depend on the area of the room and the height of the wall you plan to put it in.

Are all gas fireplaces zero clearance?

What Is a Zero Clearance Gas Fireplace? Most contemporary fireplaces need a buffer zone or a clearance area—they must not sit in or around any combustible materials or they may give off enough heat to spark a fire. Zero-clearance fireplaces are an exception.

How much clearance does a ventless gas fireplace need?

Sidewall and ceiling clearances: The sides of the fire- place opening must be at least 16″ from any combustible wall. The ceiling must be at least 42″ from the top of the fireplace opening.

What is the slimmest gas fireplace?

The Langley 36 – Direct Vent Linear Gas Fireplace. A true linear gas fireplace available at builder pricing, at only 8-3/4″ deep for framing, making it one of the thinnest linears on the market.

How much does it cost to install a zero clearance fireplace?

A contractor will charge $2,587 to install a prefabricated zero-clearance fireplace and chimney. This includes the labor and material.

How far does a mantle have to be above a gas fireplace?

about 12 inches
As a general rule, the mantel is placed about 12 inches above the fireplace opening. Then adding an inch to the distance for every inch that the mantel protrudes. So a mantel 6 inches deep, would be attached 18 inches above the firebox opening.

What is zero clearance stove?

A zero clearance fireplace is a prefabricated, factory-built fireplace that can be installed virtually anywhere, including right next to walls and directly on floors, thanks to its highly insulated construction. These fireplaces have become popular in new construction and remodels alike…

What is the clearance for a fireplace?

Typical Combustible Clearances. A gas fireplace might require a one-inch combustible clearance behind it, six inches at the sides, 36 inches out in front and 36 inches above. A typical clearance to a six-inch wide mantel shelf above the fireplace is four inches.

What is a gas fire?

gas fire. ( gas fires plural ) A gas fire is a fire that produces heat by burning gas. Please look at category 13 to see if the expression you are looking for is shown under another headword. 1 n-uncount Fire is the hot, bright flames produced by things that are burning.