How does a 5 way super switch work?

In Guitar Wiring 104, we saw that the standard Stratocaster 5 way switch is an evolution of the 3 way switch. It doesn’t actually have five separate contacts for the five positions. Instead it has three switchable contacts, and in the “in between” positions on the switch connect two of these contacts at the same time.

Where does the ground wire go on a Strat?

For this purpose, usually a ground wire is connected somewhere to the guitar bridge, in the case of a Stratocaster with tremolo this is normally a wire from the case of the volume pot to the ‘claw’ that helds the tremolo springs.

Are all 5-way switches the same?

There are two common types of 5-way selector switches in the guitar world – the Fender type and the “import” type. Both types are functionally identical but differ in physical layout. It’s easy to see which type you’re dealing with.

How do the tone controls work on a Strat?

There are two tone controls on a Strat, which adjusts how bright the tone is. The upper tone control adjusts the neck pickup, and the lower tone control adjusts the middle pickup. The volume control allows you to adjust the overall volume of the guitar, it also affects the brightness of the tone.

What is a guitar super switch?

Let’s recap the essential points: The 5-way super switch is not simply two standard 5-way switches in one package. Nope, there’s more—lots more: Instead of two stages of the normal 5-way switch, this switch offers four completely independent stages with six terminals each, so we have a total of 24 terminals.

When were push pull pots invented?

Made famous back in the ’60s, push-pull pots were used by Led Zeppelin’s Jimmy Page, when he used them to create new pickup configurations.

What is Star grounding?

A star ground is a single point that connects analog and digital ground planes or traces. The topology in star grounding is simple: connect the different digital and analog ground planes or traces back to a single point (the power supply return). The idea here is to physically isolate different ground regions.

How do I know if my guitar is grounded?

Usually that ground point will be the back of a pot or the sleeve of the output jack. When it’s properly grounded, you can touch the strings of your guitar and you’ll usually hear the background hiss reduce. Yay.

What is the wiring diagram for a Fender Stratocaster?

Name: stratocaster wiring diagram 5 way switch – Wiring Diagram for Fender 5 Way Switch New 1977 Fender Stratocaster Wiring Diagram 5 Way Switch Name: stratocaster wiring diagram 5 way switch – jeff baxter strat wiring diagram Google Search

Which is the 5 way switch on a Stratocaster?

5 way Strat switch has a few more indents. The 5-way Strat switch is the most common switch you’ll find in Stratocaster guitars. The original Stratocaster had a 3-way switch (same as a Tele) to select one of three pickups. But over time players noticed an interesting sound when switching from one pickup to the next.

What kind of 5 way switch do I Need?

For your 5 Way Switch wiring project, you want to get the best quality switch that you can. The switch is one of the first components to wear out and that leads to noise and failure. There are many kinds of switches, but this guide uses a two-stage, four-tab, 5 Way Switch.

Where does the signal go on a Stratocaster?

Dirk Wacker. February 16, A A Other Installments: Part I the signal goes to the tone pots and the output jack. Please have a look at the diagram below, showing you the standard Stratocaster wiring. The open OAK/Grigsby (now Electroswitch) 5-way switch is very similar to the CRL.