How do you set the timing on a Dodge 318?

How to Set the Timing on a 318 Mopar Engine

1. Park the vehicle on a level, paved surface and set the parking brake.
2. Remove the wingnut on the top of the air cleaner and remove the air cleaner.
3. Look at the crankshaft pulley.
4. Rotate the crankshaft with a ratchet and socket.
5. Hook up an inductive timing light to the engine.

What is the firing order on a Dodge 318?

Questions & Answers for: dodge 318 engine firing order …318 and 360 EnginesEngine Firing Order: 1-8-4-3-6-5-7-2Distributor Rotation: Clockwise: V8-400 and 440 EnginesEngine Firing Order: 1-8-4-3-6-5-7-2Distributor Rotation: Counterclockwise: V8-383 and 44 …

What is the spark plug gap on a 318 engine?

The 318 was equipped with type N14Y spark plugs. The spark plug gap was . 035 inches.

What is the timing for a 318 Mopar?

Set it the same 34 – 36 total if you are not using vacuum advance, you will just have more initial timing at idle. Try with the vacuum advance connected and disconnected to see how it runs best.

Where should I set the timing on my performance engine?

If it has too much advance, then you need to limit the amount of advance inside the distributor and give it more “initial” timing on the crank to achieve the 34-36 degrees of desired total. I usually like to see about 10 – 14 degrees in the distributor and the rest on the crank in most performance engines.

What does 18436572 mean?

18436572. Left: 1-3-5-7, Right 2-4-6-8. Chrysler V8.

What should the compression be on a Dodge 318?

Mind you the minimum cranking compression for a 318 as specified in the factory service manual is 100 psi.

What is the timing on a Dodge 360?

When adjusting the timing on the Dodge 360, the standard ignition timing is five degrees BTDC. However, you should check the specifications for your vehicles as settings will vary between applications.

What happens if timing is too far advanced?

Overheating. If ignition timing is too far advanced, it will cause the fuel-and-air mixture to ignite too early in the combustion cycle. This can cause the amount of heat generated by the combustion process to increase and lead to overheating of the engine.

How much initial timing is too much?

It depends on how much mechanical advance is in the distributor that you are using. If your initial is at least 12* after adjusting your total to 34*, I’d say you are in good shape.

What engine has the firing order 18436572?

American V8 Firing Orders

What’s the timing on a Chrysler 318 engine?

The timing procedure for the 318 is similar to that of the other Chrysler “LA” series engines. Because the 318 was in production for so many years, it is important to obtain the timing specification for your vehicle’s year and model.

What kind of engine does a Dodge 318 have?

Dodge first equipped the 318 small-block V-8 in the middle of the 1967 production year. However, the engine was essentially the same as the earlier 273 engine, but with a slightly larger bore. Although the 318 was never considered a high-performance engine, its durability made it a popular engine selection over the base model six-cylinder engines.

Where is the timing marker on a 318 Mopar engine?

If the engine has an EGR valve, disconnect its vacuum line at the carburetor and plug it. Look at the crankshaft pulley. The harmonic balancer is large, metal disc that the pulley bolts to. Find the timing marker attached to the timing cover. It sits directly above the balancer. Spray the marker with some parts cleaner and wipe with a shop rag.

What’s the idle speed on a Dodge 318?

The idle speed was 650 rpm with a manual transmission and 600 rpm with an automatic transmission. Cylinder compression must be relatively uniform among all eight cylinders and within a range of 120 and 160 lbs.