What is straight pattern globe valve?

Globe valves are closing-down valves in which the closure member is moved squarely on and off the seat. The standard Straight “T”-Pat- tern valve body is the most common, but because of its tortuous flow passage it offers the highest resistance to flow of the patterns available.

What type of globe valves are there?

There are three basic globe valve body designs: Tee, Angle, and Wye.

What is a globe valve made of?

In the composition disc, the disc has a flat face that is pressed against the seat opening like a cap. This type of seat arrangement is not as suitable for high differential pressure throttling. In cast-iron Globe valves, disc and seat rings are usually made of bronze.

Where are Warren valves manufactured?

Houston, TX
Warren Valve is a Houston, TX-based company that was founded in 1961 and since been acquired by the Allied Group. Warren valve manufactures and distributes valves geared to the oil & gas, power and chemical markets.

What is ay type globe valve?

The Y type design reduces the flow resistance of the globe valve to a minimum. Seat and stem are angled at approximately 45 degrees, what gives a straighter flow-path at full opening and offer the least resistance to flow. These valves are used for throttling during seasonal or startup operations.

What are globe valves good for?

Unlike the gate valve, globe valve can be used for regulating flow or pressures as well as complete shutoff of flow. It may also be used sometime as a pressure relief valve or as a check valve. Compared with a gate valve or ball valve, the globe valve has considerably higher pressure loss in the fully open position.

Where are globe valves used?

Globe valves are used primarily in situations where throttling of the commodity is required. By simply rotating the handwheel, the rate at which the commodity flows through the valve can be adjusted to any desired level. Having the valve seat parallel to the line of flow is an important feature of the globe valve.

How long does a globe valve last?

Using the latest and greatest ball valve in your plumbing can help save more water. It also helps you save money while helping the environment. A ball valve life expectancy is about eight to ten years. For such a simple mechanical device, the ball valve has enormous value to the gas and water industries.

What makes a globe valve a good throttling valve?

The gradual change in spacing between the disk and seat ring gives the globe valve good throttling ability. These linear motion valves can be used in a variety of applications as long as the pressure and temperature limits are not exceeded, and the process does not require special materials to combat corrosion.

What are the advantages and disadvantages of globe valves?

Recently globe valves have lost their traditional round body-shape. Globe valves have many advantages and disadvantages for users. They have excellent and precise throttling ability for high-pressure systems.

What’s the difference between Y body and Y body globe valves?

Y-body: Y-body design valves, also known as cross-flow globe valves, derive linear action from the incline between the axis of the inlet and outlet ports. This design reduces the high pressure drop inherent in globe valves. The seat and stem are at a 45° angel with the media flow, for a straighter flow path at full opening.

How is the flow rate of a globe valve determined?

Flow rate is affected by the flow characteristic and the pressure drop across the valve. In globe valves, flow rate is determined by the lift of the valve plug from the seat. Manual globe valves can have equal-percentage, linear or quick-opening flow.