Why does my Plantronics headset not working?

If you are experiencing issues using your USB headset, try the following: Unplug the headset from the PC’s USB port and reboot the computer. Do not just restart – perform a complete system shutdown and then turn back on, as this will help clear the memory in the USB ports.

How do I troubleshoot my Plantronics headset?

Why does Plantronics headset keep disconnecting?

If your Bluetooth headset disconnects during driving there may be interference from other mobile devices on the road. Wireless devices depend on a certain spectrum to function and multiple devices using the same spectrum can cause disconnection. Higher quality Bluetooth headsets are least likely to have this issue.

How do I pair my Plantronics headset C054?

Press and hold the pairing button for 5-8 seconds on the back of your C054 charging base, then release your finger. You’ll see the white LED light start flashing on the front of the charging base.

How do I calibrate my Plantronics headset?

Step 1: Press the Talk Button and push the Mute Button in for 5 seconds until the Talk Indicator Light begins to flash green. Release both buttons. Step 2: Press the Talk Button again and release. Step 3: The last step is to unplug the AC power adapter for 5 seconds, then reconnect.

How do I reset my Plantronics headset?

Reset Plantronics Bluetooth Headset

1. Remove the Plantronics headset from your cell phones paired devices.
2. Power your cell phone off, then power it back on.
3. Pair your Plantronics headset back to your cell phone (follow manual if unsure how)
4. Your Plantronics headset should now be reset.

Can Plantronics headset be repaired?

Plantronics will, at their option, repair or replace the Products that do not conform to the warranty. Plantronics may use functionally equivalent reconditioned/refurbished/re manufactured/pre-owned or new Products or parts.

Why is my Plantronics headset blinking red?

A flashing red light when charging can indicate a drained battery, we recommend you to connect to a different charger and fully charge the headphones. If the LED continues to flash red or if the headphones are not charging/powering on, please don’t hesitate to contact Plantronics Customer Care at 800-985-9815.

What do I do if my headphones keep disconnecting?

Try rebooting both devices. Avoid interference by moving away from any device that may cause a disruption. Ensure your device and headphones are within a reasonable range for connection.

How do I pair my Plantronics CS series?

Voyager Legend CS: How to Pair

1. Tap the Voice Button and say “Pairing Mode”
2. Press and hold the call button until you hear “Pairing” The power LED will turn solid blue once paired.

Are there any problems with the Plantronics cs540 headset?

One of the most common reported problem with the CS540 wireless headset, also known as the C054, is …. Echo is almost always associated with having volume up too high. Turn your phone volume down to half way. Lower your headset microphone volume to the number 2 setting.

Why does my Plantronics wireless headset have an echo?

If your callers hear an echo: Try a different configuration on the wireless headset base (pic below): Try any of setting from A-G, until the echo goes away and the optimal sound is heard. Typically an echo is caused when the volume is set too high, the excess volume causes a feedback (or echo). Check your desk phone’s volume setting.

How do I increase the volume on my Plantronics headset?

Volume/Mute Button. To increase the volume, press the volume button up (down if wearing headset on your left ear). To decrease the volume press the volume button down (up if wearing headset on your left ear). To mute/un-mute the headset, push in the volume/mute button.

How do I uninstall Plantronics headset on my PC?

Press the Windows button on the screen or keyboard and type in “Device Manager”. In the Device Manager window, find the Sound, Video and Game Controllers option and expand it. Right click on your Plantronics device and select “Uninstall”. Unplug the headset and restart the PC.