Helpful tips

What is the standard size of a tub-shower combo?

What is the standard size of a tub-shower combo?

60 inches by 36 inches by 72 inches
You will need a bit more space than a walk-in shower if you plan on installing a shower and bathtub combo for your bathroom. The standard bathtub dimensions are 32 inches wide and 60 inches long, so most bathroom and shower combos are 60 inches by 36 inches by 72 inches or 60 inches by 30 inches by 72 inches.

How much space do you need for a tub and shower?

Below are common bathroom size layouts. In general, the smallest size is 15 square feet, which can fit a sink and a toilet. For a shower, to be installed, at least 30-36 square feet is required. For a full bath consisting of both a shower and a bathtub, you will need at least 40 square feet.

What is a shower tub combination?

In this setup, a tub is typically covered with a deck of some sort, is topped with a shower surround, and includes plumbing fixtures. While prefabricated tub-shower combos can be found for around $1,000, a custom tub-shower can cost at least two to five times that much.

What are bathtub dimensions?

The most common bathtub installation is an alcove bath with an overall size of 60 inches x 32 inches. Standard tubs usually have external measurements around 60 inches long, 30 inches wide and 14 to 16 inches high. When shopping for a soaking tub, find a tub that measures between 60 inches long and 72 inches long.

How do I measure for a new tub and shower surround?

You need to start with the top of the tub and measure the width of the tub from one end to the other. The next measurement you will need is from the top of the tub to the ceiling. If you do not want to go all the way up, although most people do, the minimum height you will want to go is about 70 inches.

Is a shower tub combo a good idea?

Tub-and-shower combinations offer a great combination of spaciousness and style, and they’re the most common of all bathtub installations—found in about 65 percent of homes today. These two-in-one pieces are affordable, sturdy, and easy to install, and they make good use of limited bathroom space.

What is the most common bathtub size?

60 inches x 32 inches
The most common bathtub installation is an alcove bath with an overall size of 60 inches x 32 inches. Standard tubs usually have external measurements around 60 inches long, 30 inches wide and 14 to 16 inches high. When shopping for a soaking tub, find a tub that measures between 60 inches long and 72 inches long.

What is a good depth for a bathtub?

Standard tub depths allow for approximately 12” of water; soaking tubs should offer at least 14” or more so that the water covers the majority of the bather’s body. To determine water depth, measure the tub from the bottom (interior) to the overflow drain.

What size is the standard bath tub?

A standard bathtub is 60 inches long and about 30-32 inches wide . No one really talks about the height of a standard tub; however, in the case of walk-in bathtubs, height is significant – these special safety tubs can be up to 50 inches tall and can hold up to 100 gallons of water.

What are the dimensions of a standard shower tub?

Most bathtub and shower combos come standard and are 60 inches by 30 inches by 72 inches or 60 inches by 36 inches by 72 inches.

What is the size of a standard one-piece shower tub?

Standard tubs with apron fronts are 60 inches (152 centimeters) long and 30 to 32 inches (76 to 81 centimeters) wide. The depth can be as little as 14 inches (35 centimeters) and as much as 20 inches (50 centimeters).

What is the largest bathtub size?

Obviously the world’s largest bathtub isn’t meant for a single person or small dens. Sized at 25 feet (height) x 12 feet (width) x 72 feet (length), this colossal bathtub is backed by Guinness World Record (UK) for being the world’s largest.