Contributing

What does sidecut mean on skis?

What does sidecut mean on skis?

“Sidecut is the top-down silhouette of a ski,” Peruzzi says, meaning it’s how the ski tapers from the tip to the waist and then widens again from the waist to the tail, resulting in an almost hourglass shape. The greater the difference between the ends and the middle, the deeper the sidecut.

What do the numbers on downhill skis mean?

All modern skis have a set of dimensions; three numbers that determine their width. For example, a ski might have this printed on it: 122-86-115. This means they have a width of 122mm towards the tip (the widest point), a waist width of 86mm (under the foot), and a tail width of 115mm.

Do different skis make a difference?

Different skins or emotes have different hitboxes Any perceived difference in hitbox size is caused by differences in skin size, not the hitbox itself. The skins might look bigger or smaller, but the bit you can shoot stays the same, which can make it look like you missed someone even if they were dead in your sights.

What is sidecut radius?

A sidecut radius is simply a term used to describe the total measurement of those sidecut depths and curvatures. To measure your snowboard’s sidecut radius, you’ll want to envision the arc of your sidecut turning into a full circle to one side of your board.

What is a sidecut?

: an intersecting way (such as a road, path, or canal) branching out from the main one. side cut. noun (2) Definition of side cut (Entry 2 of 3)

What is a sidecut radius?

A sidecut radius is simply a term used to describe the total measurement of those sidecut depths and curvatures. To measure your snowboard’s sidecut radius, you’ll want to envision the arc of your sidecut turning into a full circle to one side of your board. Typical sidecut radiuses of snowboards are 6—10 meters.

Are stiffer skis better?

Generally speaking, skis that have a stiff flex will feel stable at speed and have good precision on hard snow. Stiff skis grip better on hard snow, too, because they maintain full-edge contact and don’t bounce off the snow. However, a ski that is too stiff will buck you around and burn out your quads.

What is freeriding skiing?

Freeriding is a form of skiing or snowboarding on open terrain, away from groomed slopes. Freeriding used to be combined with ski touring, meaning you’d go up the mountain on your skis before skiing down through the powder snow.

What is a progressive sidecut?

A progressive side-cut is where there is series of different side-cut radii along the edge of the board. This allows a board to behave differently when initiating a turn and when exiting a turn and in the middle of a turn.

How do you measure a ski sidecut?

If you imagine a big circle along the edge of the ski (as per the image below) – then measure that circle’s radius, then you get the Turn Radius/Sidecut radius of the ski. You can also measure the “sidecut depth” by standing your ski on it’s edge and measuring between the floor and the waist of the ski.

What’s the difference between a ski and a sidecut?

Sidecut is the slight hourglass shape of a ski when viewed from above. More sidecut translates into a shorter turn radius that makes tight turns easier. (For a full explanation, check out this post on sidecut and turn radius.) […] […] Sidecut is the slight hourglass shape of a ski when viewed from above.

How do you measure the sidecut radius of a ski?

Essentially what this is, is a measurement to depict just how much sidecut a ski has. If you imagine a big circle along the edge of the ski (as per the image below) – then measure that circle’s radius, then you get the Turn Radius/Sidecut radius of the ski.

What’s the difference between a side cut and a turn radius?

A deeper side cut means a smaller turn radius, which allows for tighter turns. Though a ski’s three width dimensions are basically consistent in varying length options, the length of the ski affects this arc. A longer ski creates a slightly longer turn radius.

What does the sicecut on a ski mean?

The sicecut on a ski is essentially the curve that you see that is created between the widest point on the tip of the ski and the widest point on the tail of the ski. In ski specs you’ll usually see measurements for the wide point on the tip, the wide point on the tail and the width of the waist.