Was the M5 Stuart a good tank?
Was the M5 Stuart a good tank?
The M5 Stuart was the Army’s standard light tank at the beginning of World War II. The tank did prove useful in an infantry support role where it knocked out machine-gun nests and other enemy strong points, supporting soldiers as they advanced. …
Is the M3 Stuart still used?
Stuart and was used for both the M3 and the derivative M5 Light Tank. In U.S. use, the tanks were officially known as “Light Tank M3” and “Light Tank M5″….M3 Stuart.
|Light Tank, M3 and M5|
|Armor||0.375 to 2.0 in (9.5 to 50.8 mm)|
|Main armament||37 mm Gun M6 in Mount M44 147 rounds|
What gun did the M5 Stuart use?
The M3A1 turret was adopted for the M5, the “short” model characterized by the roof machine gun placed at the rear. The gunner needed to stand behind, exposed to enemy fire.
Was the M3 tank any good?
The M3 had considerable firepower and good armor, but had serious drawbacks in its general design and shape, including a high silhouette, an archaic sponson mounting of the main gun preventing the tank from taking a hull-down position, riveted construction, and poor off-road performance.
What tank did the US use before the Abrams?
Army designers began developing a replacement for the M60 in the 1970s. By 1980, their creation, the M1 Abrams, was adopted for full service. The tank was revolutionary.
How much does a M3 Stuart cost?
FOR SALE: WWII M5A1 Stuart Tank – Only USD 160,000 The M3 Stuart is an American-built light tank used by the Allied forces during WW II. The name Stuart was given to the tank by the British forces after Confederate General JEB Stuart though the Americans simply knew the tank as the Light Tank M3.
Who used the M3A1?
The US Army began development of a light tank in the early 1930s. After a number of models which progressively increased armor and fire power, the M3 series was initiated in July 1940. Provided to British forces as part of the Lend-Lease Act, the M3 first saw combat with British forces in North Africa in November 1941.
How tall are army tanks?
|Mass||M1: 60 short tons (54 t) M1A1: 63 short tons (57 t) M1A1 SA: 67.6 short tons (61.3 t) M1A2 SEPv2: 71.2 short tons (64.6 t) M1A2C: 73.6 short tons (66.8 t)|
|Length||Gun forward: 32.04 ft (9.77 m) Hull length: 26.02 ft (7.93 m)|
|Width||12 ft (3.66 m)|
|Height||8 ft (2.44 m)|
Was the M3 Lee Named after Robert E Lee?
The M3 Lee was an American tanked named after General Robert E. Lee, a confederate general. The M3 Lee went into production in 1940. The M3 Lee was an American tanked named after General Robert E. Lee, a confederate general. The M3 Lee went into production in 1940.
When did the M5 Stuart come into production?
IV 143000 The M5 Stuart is an American tier 4 light tank. A further modification of the M3 Stuart, the M5 entered production in April 1942.
Can a M5 Stuart be used against a tank?
As such, it still posses formidable firepower against lightly armored tanks, but the low penetration hinders it greatly against heavily armored tanks. However, the M5’s excellent speed and agility can be used to expose the thin rear and side armor of your opponents for maximum effect.
Who was the commanding officer of the M5 Stuart?
Commanding an M5 Stuart with “the Liberators” Cotten, a platoon leader in Company D, 47th Tank Battalion, 14th Armored Division—the “Liberators”—would have to rely on his training to get out of this tight spot. He had been drafted into the U.S. Army on November 17, 1942.
Why was the M5 Stuart light tank called Honey?
Last but not least, the automobile-grade, lower octane gasoline made the M5 much safer in operations when hit. The British too were quite happy with the new light tanks (also dubbed “Honey”), as they were even easier to drive and quieter.