How do you change the battery in a hunter thermostat?
How do you change the battery in a hunter thermostat?
How do I Replace a Hunter Douglas Thermostat Battery?
- Lift the front cover of the thermostat upward.
- Push the battery release latch inward and upward to remove the battery housing unit cover.
- Insert two AA 1.5-volt batteries.
- Slide the battery housing unit cover over the batteries and back into position.
What causes thermostat not working?
There simply may not be any power going to your thermostat. This could be caused by a poor connection, blown fuse, dead batteries, or a tripped circuit breaker. If all of these areas look good and your unit should be receiving power, the issue lies elsewhere.
What would cause a thermostat not to work?
Loose connections, frayed wires, and aged wires all can cause your thermostat to eventually lose its connection to your A/C and heating system. Inspect your wiring thoroughly, making sure the connections are tight, and replace any wires as deemed necessary by you or an HVAC professional.
Where can I find the Hunter thermostat manual?
Please read this manual for complete instructions on installing and operating your thermostat. If you require further assistance, call Hunter Technical Support at 1-888-830-1326 from 8am to 5pm Central Time.
Which is the programmable thermostat model 47110a?
® Programmable Thermostat Owners Manual Model 47110A… Congratulations! Your new Hunter thermostat will provide years of reliable service. By saving energy, your thermostat will pay for itself during its first season of use. Thank you for buying a Hunter product!
How big is the battery on a Hunter Fan?
Hunter Fan Company 44110 11.2 ounces 1 x 5.1 x 4.4 inches 44110 2 AA batteries required. No White Curved Battery-powered 1 1 Digital, LCD Indoor use only
What causes a false thermostat reading on a hunter?
This air could cause a false thermostat reading. Fan come on as expected after installation. If the Fan operation is normal, leave it in the “HG” position. If the Fan does not come on within a minute of the thermostat calling for heat, change the switch position to “HE”.