Questions and answers

How do I share a LPT printer?

How do I share a LPT printer?

Type “net use lpt1: “\computername\sharedprinter” /persistent:yes” (without quotes around the outside). Replace “computername” with the computer name noted earlier, and replace “sharedprinter” with the shared printer name set previously. Press “Enter.”

What is LPT port of printer?

LPT (line print terminal) is the usual designation for a parallel port connection to a printer or other device on a personal computer. Most PCs come with one or two LPT connections designated as LPT1 and LPT2. An LPT port can be used for an input device such as QuickCam, a video camera used with CU-SeeMe .

Which port is supported for network printer?

Network Printers Internet Printing Protocol (IPP), normally port 631. Line Printer Daemon (LPD) Protocol, port 515.

How do I simulate a parallel LPT printer with a USB printer?

  1. From your PC, click the Start button.
  2. Right-click Computer, then click Properties.
  3. Navigate to Settings then click Devices and Printers.
  4. Right-click the USB Printer and click Printer properties.
  5. Click Sharing tab on the upper left panel, then click Change Sharing Options.
  6. Select the Share this printer checkbox.

How do I redirect a LPT1 to a network printer?


  1. In Win XP select Start–>Printers and Faxes.
  2. Right mouse click on your printer and choose Properties and then the Tab “Ports”
  3. Set option “Enable Printer Pooling”
  4. Now it’s allow you select additional port so go up find LPT1: and select it.
  5. Click OK.

How do I redirect my USB to LPT1?

What does a LPT port look like?

What does the parallel port (LPT) look like? With older computers, you will always find the LPT port right above the two COM ports and it’s usually color coded purple. When looking at an LPT port, it is impossible to identify whether the port is a SPP, EPP or ECP type because all three types visually look the same.

How do I connect a USB printer to a parallel port on my computer?

How to Operate Parallel Port Printers From USB Ports

  1. Make sure your printer is turned off.
  2. Plug the USB end of the cable into any open USB port on your computer.
  3. Open any word processor document and print it on your parallel printer by selecting that device in your list of printing options.

How do I connect my printer to the LPT1 port?

Type “net use LPT1 ” without the quotes followed by the computer name, then a “”, then the shared name of the printer from the previous steps. Add a space, then type “/Persistent:Yes” without the quotes. Press “Enter” to enter the command. The printer will now register as if it were connected to the LPT1 port in older programs and enable printing.

How to map LPT2 to a printer shared as laser1?

For example, to map LPT2 to a printer shared as Laser1 on a print server that is named Pserver, follow these steps: Click Start, and then click Run. In the Open box, type cmd, and then click OK. Type net use lpt2 \\\\pserver\\laser1 /persistent:yes, and then press ENTER.

Can a printer be connected to a USB port?

Many older programs expected a printer to be connected to the “LPT1” port and may be so old that updates to the program are no longer being released. There is a way to redirect software from the LPT1 to the USB port within Windows that will allow you to print from such programs. Connect the USB printer to the computer and install it by

Is there a way to delete LPT1 connection?

If you need to delete the connection at a later time, open the command prompt and type “net use LPT1 /Delete” without the quotes and press “Enter.”