Miscellaneous

How do I set up my allworx phone?

by Admin

How do I set up my allworx phone?

  1. Plug a network cable into the network port on the bottom of the Allworx phone.
  2. Connect the other end of the network cable to an available port on your network.
  3. Plug in the power adaptor, if needed.
  4. Once the phone boots and fails, press the Config soft key.

How do I access the allworx server?

To access the My Allworx Manager:

  1. Open a Web Browser.
  2. Enter the Allworx server’s LAN address into the address field of your browser and hit enter. Example: http://192.168.1.254.
  3. When the page loads, Click the Login button.
  4. Enter your username and Message Center (voicemail) password.
  5. Click Submit.

What is the port number that the allworx server uses for client certificates for secure remote administration?

Sites that have upgraded to the proper version of firmware may choose to re-enable port 8443 HTTPS access, however, it’s strongly recommended that remote administration is done with either the Secure Remote Administration feature (via port 8043) or the VPN feature.

What is the standard warranty on allworx servers?

one-year
All Allworx servers, IP phones and IP phone expanders are backed by one-year hardware and software upgrade warranty. Allworx switches come with limited lifetime warranty. This standard product warranty period begins at the time of the product installation by an Allworx Authorized Partner.

How do I change my voicemail pin on allworx?

How to Reset the Voice Mail Password for an Allworx VoIP Phone

  1. Dial “6” followed by your extension number.
  2. Enter your pass code by dialing it on the phone keypad, then press “#.”
  3. Press the “4” key to get to the main menu.
  4. Select option “1” to reset your voice mail password.

What ports need to be open for allworx?

Then each phone will need a specific set of ports mapped to it. 16384 – 16393 UDP and 5061 UDP for Remote phone1. 16394 – 16404 UDP and 5062 UDP for Remote phone2.

How do I find the IP address on my Allworx phone?

If you have forgotten the IP address of the Allworx server, the easiest way to find it is to look at the configuration of a working allworx handset. The IP address of the Allworx server will be located in the “Boot Server IP” field.

What ports need to be open for Allworx?

Who owns Allworx?

PAETEC Holding Corp.
Allworx/Parent organizations

How do I reset my PIN on my Allworx phone?

The password can be reset through the phone menus, or by an Allworx System Administrator.

  1. Dial “6” followed by your extension number.
  2. Enter your pass code by dialing it on the phone keypad, then press “#.”
  3. Press the “4” key to get to the main menu.
  4. Select option “1” to reset your voice mail password.

How do I access my voicemail on Allworx?

Checking Voicemail

  1. Press the Messages button on your phone.
  2. Enter your password (the default until you change it is 1234) followed by the #.
  3. Press 1 to listen to new voicemail. Related Articles.