How do I fix my HP error code?

In most cases a simple printer cable with reset will clear the HP error message by following these simple steps: – Turn the printer on (unless it is already switched on). – Wait until the printer is in stationery mode before you continue. – Whilst the printer is on, unplug the power cable from the back of the printer.

What does Error 49 mean on HP printer?

A 49 error typically occurs when the printer attempts to perform an action that the firmware is not capable of performing or might not be designed to handle, for example: Printing files that include unsupported printer commands.

How do I get rid of HP printer Error State?

Sometimes, simply restarting both your computer and printer can be the solution to the “printer in error state” issue. Power off your printer and computer completely, leaving them in this state for a few minutes, then turn them on again to see if the problem is gone.

How do you fix a HP printer error?

Quick fix

1. Make sure the printer is turned on. You can also restart both the printer and your computer.
2. Check if the printer is connected to your computer or WI-FI network.
3. Make sure the paper try of your printer is loaded and that the printer has enough ink.
4. If the error still occurs, contact the HP printer support.

How do you fix printer error?

How to fix ‘The printer is out of paper’ error. Check and Reload the Paper. Check the Printer’s Rear Panel Cover. Reset the Printer. Clean the Printer’s Rollers. Check the Print Spooler is on. Clear the Print Caches. Update Your Printer’s Driver.

Why is my printer saying error?

Here are a few reasons that can lead to the printing error. It might be possible that your ‘Printer Spool’ service choked on bad data and terminated, stop running correctly, or it failed to start entirely (this is the case in safe mode). Corrupt data in the spool/printing tray might be causing this service to stop.

What are the HP printer error codes?

HP LaserJet printer repair with common error code failures! LaserJet error Code 13, 13.1, 13.2, 13.3 Paper Jam/Paper Jams LaserJet 13.20 error code paper jam or bad paper feed drive assembly. Laser Jet error Code 10.10 Supply Memory Error Laser-Jet error Code 41.3 Unexpected Paper Size LaserJet error Code 49, 494c02 firmware error Laser Jet error Code 50, 50.1, 50.2, 50.3, ,50.4, 50.5, 50.6.

What does printer status error mean?

Printer status error indicates an outdated USB driver issue. Since paper jam is quite common for all types of printers, you can often find this error in case of paper jamming as well.