Can you put eyelet curtains on a curtain track?

Curtain tracks are made from either plastic or metal and are used to hang and draw curtains that have heading tape. You can’t use eyelet curtains or tab top curtains with a curtain track. They also allow a wider range of curtain styles to be hung, including eyelet, tab top and pencil pleat.

How do I turn curtains into eyelet curtains?

2) Fold under 2cm at the top of the curtain panel and lightly iron. Pin the eyelet tape along the top edge of the fabric and sew into place. Draw around the inside of each ring with a fabric pen, then cut out these circles to create the eyelet holes. 3) Press the eyelets into place at the front of the curtain.

Can eyelet curtains be changed to pencil pleat?

I convert a lot of eyelet curtains to pencil pleat while shortening them, it’s almost always cheaper than buying fabric to have them made, especially when the sales are on. These are from Dunelm if you like the look of them.

How far apart should curtain eyelets be?

Generally, grommets are spaced about 6 inches apart on center. The first and last grommet are inset the space needed for the return to the wall, and in front of the window at the leading edge. If there is a window frame, blinds or shades on the window, you will want the spacing to clear what is behind the rod.

Can you put eyelet curtains on any pole?

The only real difference between an eyelet pole and a normal metal curtain pole is the curtain pole rings. So if your pole is 28mm diameter or slightly smaller then it will be fine for your eyelet curtains.

How much space should be between eyelets?

How to make eyelet curtains in 3 Easy Steps?

Draw around the inside of each ring with a \ fabric pen, then cut out these circles \ to create the eyelet holes. 3) Press the eyelets into place at the front of the curtain. Fold the bottom 2cm of the panel under and lightly iron. Fold under a further 10cm, pin and machine stitch for the bottom hem.

How big of a border do you need for eyelet curtains?

Consider the seam allowance when working out your measurements. (I’ve use ½”) If you’re using a border at the top and bottom of your curtain, allow a length of 10” for each border and twice the width of the window. Take the measurement of the drop you require, deduct 19” to allow for the borders and cut your centre fabric to this measurement.

Which is the correct number of eyelets on a curtain panel?

With an even number of eyelets, the left and right sides of the curtain panel will fold neatly back towards the wall. With an odd number of eyelets, you’ll end up with one side pointing out towards the room instead of the wall. This will expose the side seam and it won’t look very crisp.

Can you use eyelet tape with eyelet rings?

If you’re using separate eyelet rings and eyelet tape, try to pick up products from the same manufacturer to ensure a good fit. Some eyelet tape comes with the eyelet backing pre-attached, but other brands make the front and back eyelet ring pieces separately. Either option will work out fine.