Miscellaneous

What UHF channel do truck drivers use in Australia?

What UHF channel do truck drivers use in Australia?

Channel 40
Channel 40 commonly used by truck or oversized vehicle drivers: This channel is Australia’s main road safety resource.

What UHF channel do police use in Australia?

The Australian Communication and Media Authority (ACMA) website states by law Channel 5 and 35 are strictly for emergency use.

What are the 80 UHF channels?

Here’s the UHF 80 Channel use list:

Channel Frequency Channel Spacing
Channel 77 477.3375 12.5 KHz
Channel 78 477.3625 12.5 KHz
Channel 79 477.3875 12.5 KHz
Channel 80 477.4125 12.5 KHz

What UHF channel do caravanners use?

Channel 18
Channel 11: Call Channel used for locating friends – a general meeting point for when communications are lost or beginning, before moving to another channel. Channel 18: Caravanners and Campers Convoy Channel.

Which CB channel do truckers use?

Channel 19
To this day, Channel 19 is where drivers can obtain information about road construction, accidents, and speed traps. It’s heartwarming to know that truckers use CB radios as they continue to offer road-safe communication while driving.

What CB channels are available in Australia?

Current UHF CB band plan (80 Channels)

Channel Name: Frequency: Purpose:
Channel 38 477.3500 Repeater Input
Channel 39 477.3750 General Chat Channel
Channel 40 477.4000 Road Safety Channel Australia Wide
Channel 41 476.4375 Repeater Channel

What CB radio channel should I use?

Any authorized CB radio frequency is open to all, but some have agreed-upon special purposes. For instance, channel 9 is for emergency use, and channel 19 is used by truckers to report on traffic conditions. Channel 19 is at the middle of the bands, thus has the best antenna efficiency.

What UHF frequencies can I use in Australia?

You can only use CB radios on designated channels in these frequencies: HF – 26.965 MHz to 27.405 MHz (inclusive) UHF – 476.4125 to 477.4125 MHz (inclusive)

Are UHF radios legal in Australia?

The Australian Communications and Media Authority (ACMA) has reversed its decision to make 40 channel UHF radios illegal from June 2017. Upgrading to 80 channel radios was going to cost some businesses tens of thousands of dollars.

Is CB a VHF or UHF?

CB uses AM, Ham VHF and UHF uses FM. Think of riding in your car and switching back and fourth between AM and FM on your stereo. The AM has a lot of white noise and static compared to FM signals. The same thing goes on with your CB.

Are there any UHF radio channels in Australia?

UHF CB is a class-licensed citizen band two-way radio service using the 476.4250–477.4125MHz radiofrequency intended for short-distance communications. The UHF CB band radio service is available for public access and is authorised by the governments of Australia, New Zealand, Vanuatu and Malaysia.

Are there any CB radio channels in Australia?

The UHF CB band radio service is available for public access and is authorised by the governments of Australia, New Zealand, Vanuatu and Malaysia. UHF CB provides 77 UHF channels, including 32 channels (16 output and 16 input) assigned to repeater stations.

How many UHF channels are there on CB radio?

UHF CB provides 77 UHF channels, including 32 channels (16 output and 16 input) assigned to repeater stations. Although the service is technically available to everyone, not all CB radio channels are allowed for use by just anyone for whatever reason. In fact, the penalties can be pretty stiff for anyone caught misusing certain UHF radio channels.

What are the channels in the CB band?

Channels 31 to 38 and 71 to 78 – Repeater inputs – Do not use these channels for simplex transmissions as you will interfere with conversations on channels 1 to 8 and 41 to 48. The Australian Government has legislated that channels 5 & 35 on the UHF CB Band are reserved for emergency use only